This website contains information about iPhone, including how to active and unlock it and also states the problems which may arise during unlocking process. Thanks to Iphone Dev team, elite team, Installer.app team, geohot, GeeZuZz and all others involved in the iPhone hacking scene!
Activating iPhone v1.1.1
Posted by Ruben in Hacking
Before you go with this activation guide, you will need to have an active WiFi hotspot, so that you will be able to connect to the internet via your iPhone.
Step 1
Make sure you have a SIM-card with PIN turned off, and power on your phone (the supplied AT&T card works fine).
Step 2
Connect the phone to the PC.
Step 3
On the activation screen, slide for emergency and dial: *#301# to make the phone call itself. (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself).
Step 4
Answer the call, and tap on Hold
Step 5
Phone will call it self again, tap Decline. You will now be returned to the normal dialer.
Step 6
Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL’s. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is i.unlock.no. Tap Save.
Step 7
Your contact now has two “web pages” - tap on the first one (prefs:). This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General → Auto-Lock → Never.
Step 8
Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page, i.unlock.no.
Step 9
Safari will launch and show you a webpage. Tap on Tap here to jailbreak your iPhone.
Step 10
Phone will return to activation screen and after a few seconds the phone should restart.
Step 11
If the phone does not restart after waiting a full minute, please make sure that you have your phone connected to the computer and try again.
Step 12
When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successful!
Activating iPhone v1.0.2
Posted by Ruben in Hacking
First of all, you will need to download the following tools from our download section:
The process is quite simple:
Step 1
Unzip the files you downloaded somewhere.
Step 2
Connect your iPhone to the PC.
Step 3
Run iBrickr.exe which should be located in the directory you extracted iBrickr files. Click the jailbreak button and follow the steps.
Step 4
Now go to the folder where you extracted activation files, run activation.bat file and follow the steps.
That’s all, you have got an activated iPhone with firmware 1.0.2.